Unitec Portal 2 To 3 Upgrade Path User Manual download pdf

PORTAL TI

Document Number: PTL1030 Page 1 of 4

Document Name: Portal 2 to Portal 3 Upgrade Instructions

Portal 2 to Portal 3 Upgrade Path

In order to upgrade from Portal 2 to Portal 3, you MUST have a laptop and an Internet

connection, and an Arbor board installed in at least one Portal. You WILL NOT be able to

move any information over from the Portal 2 cards to the Portal 3 cards – you will be

starting fresh.

1. Record all pertinent information from your Portal 2 Setup screens onto the following

pages.

2. Print all accounting reports and house account reports from Portal 2 machines.

3. Power down the Portals and remove the C and D drives. Keep the C and D drives in a

secure place for data backup.

4. Make sure an Arbor carrier board is installed in at least one machine. That machine will

be the primary Portal.

5. Insert the new C drive into the top slot and D drive into the bottom slot of the machine(s).

6. Power up the primary machine. Enable the server on the primary Portal by entering the

code 4401 then Enter on the keypad. Login to Maintenance Mode using UserID 00 and

Password 00. Go to Setup>Enable Local Server. The Portal will reboot and start up in

Out of Service mode.

7. Log into the Maintenance screen and ensure that the Portal ID is 1 for the primary Portal.

8. Using a laptop or desktop PC, access the management application by entering the

following into the address bar:

http://XXX.XXX.XXX.XXX:9810/web (where XXX equals your site IP address)

9. Login to the application using UserID 00 and Password 00. Enter the information for Site,

Products, Device Profiles, POS Interface (if required), and Devices according to the

information you wrote down from Portal 2. Follow the instructions in the Portal Owners

Manual.

10. Reboot the primary Portal and power up the secondary Portal, if applicable. Both Portals

will start up in Out of Service mode.

11. Assign the device profiles to each machine according to the Portal Operations Manual.

12. Login in to Maintenance Mode and make a Cash Withdrawal (withdraw all money from

the coin and bill dispensers in the machine) and then make a Cash Deposit so that cash

reporting will be accurate.

13. The Portals will now be operational.

1 2 3 4

Summary of Contents

Page 1 - ORTAL TI

PORTAL TI Document Number: PTL1030 Page 1 of 4 Document Name: Portal 2 to Portal 3 Upgrade Instructions Portal 2 to Portal 3 Upgrade Path I

Page 2 - Programming Information

PORTAL TI Document Number: PTL1030 Page 2 of 4 Document Name: Portal 2 to Portal 3 Upgrade Instructions Programming Information Site Inform

Page 3

PORTAL TI Document Number: PTL1030 Page 3 of 4 Document Name: Portal 2 to Portal 3 Upgrade Instructions Wash Feature Text: The feature text

Page 4 - PORTAL TI

PORTAL TI Document Number: PTL1030 Page 4 of 4 Document Name: Portal 2 to Portal 3 Upgrade Instructions Combo Mode: (applies to combination

Comments to this Manuals

No comments

Unitec Portal 2 To 3 Upgrade Path User Manual

Browse online or download User Manual for Equipment Unitec Portal 2 To 3 Upgrade Path. Unitec Portal 2 To 3 Upgrade Path User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Unitec Portal 2 To 3 Upgrade Path